Needless to say, water is our life, and with the increase in pollution, getting access to purified and clean water is becoming difficult. But thanks to technology, it has devised ways through which we can get purified water.
Drinking purified water is no longer something that is out of our reach. More or less, every home nowadays has water purifiers, which allow us to drink pure water. But do you know that it is equally essential to maintain the appliance by changing its filter at regular intervals? Yes, it is only then the water purifier will continue to serve its purpose by providing you with the purest and cleanest water.
So if you haven’t checked in a while whether the filter is nearing its expiry, give it a check and give a call to the water purifier service Bhopal. Today in this article, we will let you know all about the indications of when to change the filter of your water purifier along with different types of filters in a water purifier. So let’s take a look!
What Are the Different Types Of Filters in Your Water Purifier?
Having access to fresh and clean water has become a privilege for almost everyone. Considering the terrible quality of source water from the treatment plans, installing a water purifier has become important. However, it is not all; if you want to get a continuous supply of pure water, you must maintain the filters of the water purifiers.
Since water filters are the most vital parts of a water purifier, it does the most work. Therefore, the layers wear off due to repeated use and need occasional replacement to keep performing at their full potential. So after every 6-8 months, you need to contact the water purifier service to get your filter replaced. There are mainly two types of filters in your water purifier, Sediment and Carbon filter. Let us see how they function!
A sediment filter is one of the essential parts of a water purifier that plays a significant role in draining out dirt and other harmful impurities from the water. Furthermore, it also helps in maintaining and protecting the RO membranes from impurities. So you need to change the filter at regular intervals, as the dirt and impurities often clog and block the pores in the filters, thereby disrupting the flow of water. Moreover, if left unattended for a long time, the impurities from the source water will reach the RO membrane and contaminate the pure water. Needless to say, that this can cause severe waterborne diseases.
Often, the water that comes from the treatment plants has a very foul smell, which can be either due to chlorine or other chemicals. This is very natural as the water before reaching our houses passes through various corroded pipes and polluted areas, which leaves traces of various harmful chemicals in the water, thereby adding the foul smell.
However, when the water passes through a water purifier, the carbon filter plays a significant role in removing any traces of chlorine or other harmful chemicals from the water. Therefore, you need to change the carbon filter at least once a year not to interrupt the process of drinking fresh and purified water. You can also know about the processes in more detail from Kent service Greater Noida.
What Are the Indicators that Point to the Changing of Water Filters?
It is a common question among many consumers: What is the right time for changing the water filters of your purifiers? Well, the water purifiers have an in-built filter change alarm system that rings whenever the expiry of your filter is nearing. In addition, here are some other major indicators that help you realize the right time to change your filters:
Purified Water Takes Longer Time to Dispense
This is one of the major indicators that make you realize that you need to call your water purifier service to replace the filters. You will notice that when the time comes for filter replacement, there is a reduction in the flow of purified water, which usually dispenses within seconds. This might be because of the filters getting clogged or blocked by impurities, thereby restricting water flow.
Check Your Sediment Filter For Layers of Dirt
As we discussed above, a sediment filter is one of the major parts of a water purifier. They remove sediments or suspended particles like silt, clay, mud, etc., from the source water. Since the sediment filter is present outside the purifier, you can easily check if the filter is getting clogged by dirt or sediments and arrange an immediate replacement. If you are unable to check it yourself, you can also contact Aquaguard service Delhi for help.
The Taste Of Water Changes
It is very natural that when your filters get clogged with dirt and sediments, they won’t perform at their full potential, thereby leaving flaws in the purification system. Therefore, after repeated use of these filters, the cartridges may lose their absorption properties, impacting efficacy. So certain impurities or Total Dissolved Solids may not be purified in the process, which changes the taste of the water by reducing its sweetness.
So you can well understand why it is so essential for you to keep a check on the water filters and replace them at regular intervals to avoid disrupting the process of getting purified water. Just like any other appliances, water purifiers need proper maintenance to function properly. Only then will they provide you with the purest and cleanest water.